Benchtop/Handheld
Networked
USB
Height Adjustable Leg/Column
Lifting Column Accessories
Synchronized Control Box
Touch Control Panel
Immediate Shipping
Shipping process will start with 2-3 days of receiving the order
WTT-105 Controls
General Features
- Technical Parameters
- Number of Actuator 1~4 Actuator
- Color White
- IP rating: IP54
- Certificate: CE/RoHS
- Matching with GeMinG control box HTT- series.
Description
General Features
- Technical Parameters
- Number of Actuator 1~4 Actuator
- Color White
- IP rating: IP54
- Certificate: CE/RoHS
- Matching with GeMinG control box HTT- series.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
HTA1 Lifting column
Product Features
- Motor type: permanent magnet DC motor
- Voltage: 12V DC, 24V DC, 36V DC, 48V DC
- Maximum self-locking force: 8,000N/Limited to thrust
- Maximum load: 6,000N/Limited to thrust
- Maximum tension: 2,000N/Maximum tension
- Maximum speed at full load: 18 mm/s (load 1,500N)
- The slowest speed at full load: 3.5mm/s (load 8,000N)
- Stroke: 100~900mm
- Minimum size: stroke + 180 mm (limited to 300 mm stroke or less)
- Minimum size: stroke + 200 mm (over 300 mm stroke or more)
- Maximum outer tube size: two sections, 173*121mm, rectangular
- Color: silver gray or customized
- IP rating: IP54
- Operating temperature range: -45°C~+75°C
- Full performance operating temperature range: +5°C~+45°C
- Higher duty cycle (25%)
- Other options: Hall sensor (single or double), motor wire outlet mode is upper or lower side outlet, can synchronize the lifting operation of the system
- High-strength metal zinc alloy housing protects motors and gears
- Limit switch (built-in: not adjustable)
HTL83 Lifting column
General Features
- Maximum load: 800N in push
- Maximum speed at full load: 38mm/s (with 800N in a push condition)
- Minimum installation dimension: 650mm
- Stroke: 500mm
- Highest height: 1150mm
- Dimension of outer tube (L*W): 80*60mm
- Two stage outer tube with rectangular appearance
- Color: Silver gray
- Operational temperature range: -45°C~+75°C
- Operational temperature range at full performance: +5°C~+45°C
- Higher duty cycle (25%),
- With narrow top and wide bottom configuration
HTL86 Electric lifting column
Product Features
- Motor type: permanent magnet DC motor
- Maximum load: thrust 800N
- Maximum speed at full load: 38mm/s (800N in the push state)
- Minimum installation size: 560mm
- Stroke: 600mm
- Maximum height: 1210mm
- Outer tube size (length * width): 70 * 70mm
- Two-stage outer tube with rectangular shape
- Color: silver gray
- Operating temperature range: -45°C~+75°C
- Full performance operating temperature range: +5°C~+45°C
- Higher duty cycle (25%)
- Narrow top and wide bottom configuration
HTT2 Protocol Synchronous Control Box
Product Features
- Compact, high-power controller
- Control options: Joystick control, 485 communication control
- Number of controlled motors: 2
- Input voltage: 110-240V AC
- Output voltage: 24-29V DC
- Color: Black
- Casing material: Flame-retardant ABS
- Current limiting, overload protection
- Overheat protection
- Short-circuit protection
- Insulation function
- Soft start and stop functions
- Ultra-low standby power consumption, meeting environmental standards
- Plug-in power cord (standard length 3 meters) with optional power plugs for global compatibility
- Integrated mounting holes for independent installation
- Ultra-low standby power consumption, meeting environmental standards
- Duty cycle: Up to 10%
Use
- Duty cycle: 10%; 2 minutes of continuous use, 18 minutes of rest
- Operating temperature: +5°C to +40°C
- IEC60601, RoHS certified
HTT4 Protocol Synchronous Control box
HTT4 controller is a controller designed specifically for four-motor lifting products. Through manual operation, height restrictions, system lock-in
and anti-collision sensitivity(optional) can be achieved. It can be used for all GeMinG office series lifting columns. It ensures the synchronization and
smooth operation of the lifting system, and can be soft stopped and soft stopped. All controllers have a resistance recovery function(optional)
that prevents objects from being squeezed or bumped during lifting.
HTX2 Series Lifting column
Product Features
- Motor type: permanent magnet DC motor
- Voltage: 12V DC, 24V DC, 36V DC, 48V DC
- Maximum self-locking force: 3,000N/Limited to thrust
- Maximum load: 1,500N/Limited to thrust
- Maximum tension: 500N/Maximum tension
- The fastest speed at full load: 9.5 mm / s (load 500N)
- The slowest speed at full load: 4.8 mm / s (load 2,000N)
- Stroke: 100~600mm
- Minimum size: stroke + 180 mm (limited to 300 mm stroke or less)
- Minimum size: stroke + 200 mm (over 300 mm stroke or more)
- Maximum outer tube size: two sections, 100*100mm, square
- Color: silver gray or customized
- IP rating: IP54
- Operating temperature range: -45°C~+75°C
- Full performance operating temperature range: +5°C~+45°C
- Higher duty cycle (25%)
- Other options: Hall sensor (single or double), motor wire outlet mode is upper or lower side outlet, can synchronize the lifting operation of the system
- High-strength metal zinc alloy housing protects motors and gears
- Limit switch (built-in: not adjustable)
HTY6 Medical control box
The HTY6 control box is suitable for one to four GeMinG linear actuators of any type. Built-in maximum 10A switching power supply, support 100~240V input voltage. In addition, the HTK106Y has built-in anti-collision smart detection to protect the linear actuator from the danger of collisions during lifting due to external forces. It also has a built-in wireless remote control that allows the use of a wireless remote control to control the linear actuator.
Reviews
There are no reviews yet.